Infrared receiver for remote controls (1) 03/16/2005

Project size : 58kB No matter which button you press on your infrared remote control - this program "recognizes" each button you press on the remote control. Each button is assigned to an individual "hexadecimal" string. -So if you are an experienced programmer, you can log these characteristic and individual strings, you can analyse the strings - et cetera. The program works with a 9-pin "COM port" interface with 1 diode, 1 resistor, 1 capacitor and a "TSOP" Infrared receiver (the interface can be do-it-yourself). The electronic components are cheap and cost about 2 dollars. Project tested on Win98SE.