Results for "Author: chin huat"
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...
I'm still new to creating ActiveX DLL. After downloading some DLL plugin samples from Planet-Source-Code i found that some of the codes need to register the DLL manually (that is typing "c:\windows\system\regsvr32.exe DLLFILENAME" in MS-DOS prompt) or an extra EXE is created for that purpose. Why not add an "Register DLL" option into context menu (the menu which pops up when you right click on any dll files with your mouse on right panel of Windows Explorer)?
Load this screen saver in 6 lines of code! Features includes: 1. uses class module, loads multiple shapes easily 2. highly customizable and optimized graphics routines 2. supports color blend, color range, display range 3. auto screen resolution detection (so easy that i laughed :) and yes... 100% pure VB code ^^) Just compile into .EXE and rename as .SCR (improper way :p)
The original source code was from someone (AndrComm or Sebastien?) else. I recode the whole thing, but having reference to the original. Anyway thanks, whoever who are who wrote the original code (yeahh.. all creadits to him) since i learnt some performance optimization (my original codes are tremendously slow).I did some code clean up and comments. The encode speed increased by 20%, decoded speed increased by 30%. Here's the best results that i come out with: file : command.com (93,040 bytes) load : 2.56 mb/sec (n/a in original code) save : 3.39 mb/sec (n/a in original code) encode : 7.17 mb/sec (20% faster, original code runs at 6.05 mb/sec) decode : 7.31 mb/sec (30% faster, original code runs at 5.61 mb/sec) Here's the changes I've made : 1. *REWROTE* code clean up (i think it should be more readable) 2. *REWROTE* encode and decode table is created together. 3. *REWROTE* sub DECODE rewrote (should be faster). 4. *REWROTE* sub SPAN and UNSPAN now supports SpanSeparator. 5. *ADDED* More detailed co1mments for novice, not experts 6. *ADDED* some form controls, for input and output. 7. *ADDED* file loading and saving feature 8. *FIXED* encode / decode rate calculation fixed... more accurate should be 1 sec = 1024 ticks (kernel 1044 ticks?) and 1 mb = 1048576 bytes. (1024b x 1024b) and some other minor corrections as well...